Drain plows

JYM-75 DRAIN PLOW

The JYKEVÄ drain plow helps to prevent standing water problems caused by summer and autumn rains, allowing you to effectively and economically direct water from furrows and sources into drainage and open ditches. The drain plow can also be used to install drainpipes in the ground.

Technical specifications

– Max. working depth 75 cm
– Thanks to the sharpened cutting blade, there is little tractive resistance – approx. 50 hp is all that is needed to pull the unit.
– Breakaway bolt (20 mm) on the blade prevents damage to the tractor and plow
– Blade: 20 mm HB wear-resistant steel
– Ball hitch 75 mm, with a coupler for fastening a drainpipe
– Weight: approx. 130 kg

JYS100 DRAIN DIGGER FOR TRACTOR 3-POINT LINKAGE

Designed to be hitched to the 3-point linkage on a tractor, the drain digger can be used to cut a furrow and lay drainage pipe and gravel in a single pass. The large gravel funnel, stepless gravel damper and ability to adjust the plow angle with a heavy-duty cylinder make installing underground drainage a snap.

Technical specifications

– Hitch: 3-point linkage (Cat. 2)
– Pipe sizes: 50 – 80 mm
– Maximum working depth: 100 cm
– The ditch depth and slope can be precisely adjusted using the machine’s 100/50 mm hydraulic cylinder
– Stepless setting of the gravel layer
– Comes standard with a hose reel and machine storage rack
– Length: 400 cm
– Height: 170 cm
– Gravel funnel: 850 x 1500 mm
– Weight: 950 kg

JYS120XL DRAIN DIGGER FOR TRACTOR 3-POINT LINKAGE

More feature-rich model than the JYS100 for heavier use:

Technical specifications

– Hitch: 3-point linkage (Cat. 2 and 3)
– Pipe sizes: 50 – 100 mm
– Maximum working depth: 120 cm
– The ditch depth and slope can be precisely adjusted using the machine’s 125/63 mm hydraulic cylinder
– Replaceable CAT1U3452 bucket tooth wear tip
– Stepless setting of the gravel layer
– Comes standard with a hose reel and machine storage rack
– Length: 400 cm
– Height: 190 cm
– Gravel funnel: 850 x 1500 mm
– Weight: 1100 kg

JYSE140XL FOR ROTATING EXCAVATORS

Technical specifications

– NTP-10 flange mounting (also available with other quick-mount fasteners)
– Pipe size: 50 – 100 mm
– Maximum working depth: 140 cm
– Replaceable CAT1U3452 bucket tooth wear tip
– Stepless setting of the gravel layer
– Comes standard with a hose reel and machine storage rack
– Length: 340 cm
– Height: 200 cm
– Gravel funnel: 850 x 1500 mm
– Weight: 1100 kg

JYX130 FOR ROTATING EXCAVATORS

Technical specifications

– NTP-10 flange mounting (also available with other quick-mount fasteners)
– Pipe size: 50 – 100 mm
– Maximum working depth: 130 cm
– Replaceable tip made of wear-resistant steel
– Stepless setting of the gravel layer 100-500 mm
– Hydraulically-controlled flap at the back of the gravel funnel for making weepholes
– Comes standard with a hose reel and machine storage rack
– Length: 400 cm
– Height: 200 cm
– Gravel funnel: 500 x 1500 mm
– Weight: 1200 kg